ASTM N06600 90 LR-Winkel 45 LR-Winkel
Basisinformation
Modell: 1/2"-72"
Produktbeschreibung
He Bei GuangHao Pipe Fittings Co., LTD Spezialisiert auf die Herstellung von Stahlrohren und Rohrfittings
Hauptproduktion: Wärmeschutz-Korrosionsschutzrohr, nahtloses Rohr, ERW / HFW-Stahlrohr, LSAW- STAHLROHR , Spiralrohr , stumpfgeschweißte Stahlrohrfittings, Industrieflansche, Stahlrohre, Schweißrohrbögen, Schweißrohr-T-Stücke, geschmiedete Fittings usw.
Willkommen zu diskutieren
Geschmiedete Fittings/Buttweld Steel Fittings Typ: Bogen, Kreuz, Straßenbogen, T-Stück, Kupplung, Halbkupplung, Kappe, Stecker, Buchse, Anschluss, Auslass, Salbeinippel, Bullplug, Reduziereinsatz, Rohrnippel usw
- 90° Reduzierkrümmer
- 45° Reduzierkrümmer
- 135° Reduzierkrümmer
- 180° Reduzierkrümmer etc.
pipe fiting size | seamless 1/2"-30" | ||||
welded 3"-72" | |||||
elbow /bend degree | 11.25 degree---180 degree | ||||
pipe fitting thicknes | sch10s,sch20,…sch xxs | ||||
Dimension Tolerance | ±12.5% | ||||
pipe fitting size standard | ASME B16.9,MSS-SP75 | ||||
pipe fitting mareial | carbon steel(A234 WPB,A234 WPC,A420 WPL6,etc) . | ||||
stainless steel(ASTM A403 WP304 ,WP304L WP316 WP316L WP321 … | |||||
alloy steel (A234 WP12 WP11 WP22 WP5 WP9 WP91 …) | |||||
pipeline steel (ASTM A860 WPHY42,WPHY46,WPHY52,WPHY56,WPHY60 WPHY65 WPHY70…) | |||||
High Nickly Alloy (Inconel 600,Inconel 625,Inconel 800,Inconel 825,Nickel 200,nickel 201,) |
ASTM B366 / ASME SB366 Inconel 600 Stumpfschweißfittings-Spezifikation
Grade | Inconel 600 fittings |
---|---|
Standard | ASTM B366 / ASME SB366 |
Dimensions | ANSI/ASME B16.9, B16.9, MSS-SP-75 |
Inconel 600 fittings Type | Seamless / Welded / Inconel 600 fittings |
Color | black |
Wall thickness | SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS available with NACE MR 01-75 |
Technics | BUTT WELD /FOREGED |
Types of Inconel 600 Material |
Reducing Tee, Cross, Reducer, Concentric Reducer, Elbows, Long Radius Elbow, Short Radius Elbow, Bend, Long Radius Bends, Piggable Bends, Tee, Equal Tee, Con Reducer, Ecc Reducer, Eccentric Reducer, Pipe End Caps |
Inconel 600 fittings Size Range | ½" NB to 120" NB, Seamless ½" to 24", Welded ½" to 120", Two Joint / Two Halve Fittings 6" to 48" |
Inconel 600 fittings Dimensions | ANSI/ASME B16.9, B16.28, MSS-SP-43. |
B336 Inconel 600 Material | Elbows, Tees, buttweld fittings, pipe fittings, Reducers, End Caps |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
Surface treatment | Sand Blasting, Sand Rolling, Sand Blasting |
Application & uses | Petroleum, chemical, power, gas, metallurgy, shipbuilding, etc |
Seamless/ Welded Inconel 600 fittings 100% Radiography Tested |
Arten von WPHY 60-Armaturen
Arten von Inconel 600 Stumpfschweißfittings
- Inconel 600 45-Grad-Winkel
- Inconel 600 Rohrfittings
- 600 Inconel Stumpfschweißfitting
- 600 Inconel-Rohrfitting
- Inconel UNS N06600 Schweißfitting
- Inconel WERKSTOFF NR. 2.4816 Rohrfittings
- ASTM B366 600 Inconel Stumpfschweißfitting
- 600 Inconel 90-Grad-Winkel
- 600 Inconel 45-Grad-Winkel
- Inconel UNS N06600 45-Grad-Winkel
- Inconel WERKSTOFF NR. 2.4816 45-Grad-Winkel
- ASME SB366 600 90-Grad-Winkel
Inconel 600 Stumpfschweißfittings Chemische Zusammensetzung
Grade | Inconel 600 |
---|---|
C | 0.15max |
Mn | 1.00 max |
Si | 0.50 max |
S | 0.015 max |
Cu | 0.50 max |
Fe | 6.00 - 10.00 |
Ni | 72.00 min |
Cr | 14.00 - 17.00 |
Mechanische Eigenschaften von Inconel 600 Stumpfschweißfittings
Grade | Inconel 600 |
---|---|
Density | 8.47 g/cm3 |
Melting Point | 1413 °C (2580 °F) |
Tensile Strength | Psi - 95,000 , MPa - 655 |
Yield Strength (0.2%Offset) | Psi - 45,000 , MPa - 310 |
Elongation | 40 % |
Inconel 600 - Äquivalente Qualitäten
STANDARD | Inconel 600 |
WERKSTOFF NR. | 2.4816 |
UNS | N06600 |
JIS | NCF 600 |
BS | NA 13 |
GOST | МНЖМц 28-2,5-1,5 |
AFNOR | NC15FE11M |
EN | NiCr15Fe |
Produktgruppe : Stumpfschweißfittings aus Stahl > Stumpfschweiß-Ellbogen